SP2 won't configure for Google Voice.

(1/2) > >>

tbell:
Hello...New to this.  I have obi200.  I have configured sp1 to freephone line.ca, and it seems to be working fine.

I tried to configure SP2 to google voice.  I used this tutorial..http://blog.voipdiy.com/2013/07/obi202-configure-google-voice-voipms.html.. and SP2 will not configure.  It seems fairly simple to configure sp2 using the Google voice box and simply adding user name and password.  Each time I reboot changes, sp2 shows up as not being configured. I am manually trying to do this through the IP address, not via the Obi web site.  Any suggestions....tbell

Hortoristic:
Since getting the latest firmware - my GV says not configured and I've been an OBI user for many years and I can't get it to take GV.

I kicked off a ticket with OBHAI but haven't heard back - and you seem to be the first guy I've encountered with similar challenge.

For years I've been using SP1 for GV, I even tried configuring a whole new SP3 from scratch and it just says "not configured".

I found your post while looking into how I might roll back firmware.

Taoman:
Quote from: Hortoristic on November 14, 2014, 08:52:38 am


For years I've been using SP1 for GV, I even tried configuring a whole new SP3 from scratch and it just says "not configured".



How are you trying to configure GV? Are you using the Obitalk web portal or the built in web interface on the OBi itself?

The new firmware only allows you to configure a Google Voice trunk via the Obitalk web portal.

Hortoristic:
I do all  my configuration outside of OBITALK portal - using url IP of my 202 device.

This was an existing SP that was configuring - why would their firmware disable it and force me to reconfigure the SP via the OBITALK portal?  I have quite a few complexities in my call routes and don't want the portal to overwrite them.

I suppose if what you are saying is true, I need to copy and past all my many years of adjusting strings into notepad, turn auto provisioning on, get GV working, turn auto provisioning back off then paste all my strings back in place - what a pain! 

Taoman:
Quote from: Hortoristic on November 14, 2014, 09:11:29 am


I suppose if what you are saying is true, I need to copy and past all my many years of adjusting strings into notepad, turn auto provisioning on, get GV working, turn auto provisioning back off then paste all my strings back in place - what a pain! 


Read this:

http://www.obitalk.com/forum/index.php?topic=8685.0

Navigation

[0] Message Index

[#] Next page