Distinctive Ring with OBI (GV(1,3)->Asterisk(4)->OBI (Ph1,Ph2).....
lrosenman:
I have an Obi 202, with 2 GV(SP1,SP3) accounts, Vitelity(SP2/e911, house number), and an Asterisk(FreePBX/IncrediblePBX, RaspberryPI) extension. All calls coming in both GV lines go through Asterisk to do CNAM lookup.
Is there a way I can have the phones get different distinctive rings based on which of the 2 GV numbers was called?
azrobert:
I assume you are routing calls from Raspbx back to the OBi202.
How are you routing calls back to the OBi202?
Do you have SP4 registered as a Raspbx extension?
Is SP2 outbound only?
Are you using both phone ports on the OBi202?
Ring Patterns are assigned to an SP.
You would have to route GV#1 calls to SP2 and GV#2 calls to SP4.
lrosenman:
yes, the calls come back to the OBI on SP4 (a PBX extension). I can *NOT* dedicate lines as you suggest, I.E. SP2 is the e911 / house line, and SP4 is the Asterisk.
Both PH1 and 2 are in use (PH1 is wireless DECT phones, and PH2 is my office Phone, and the Printer/fax machines).
Is there anything we can do on the Asterisk side to help here?
azrobert:
You could route GV#1 calls to SP4 with ring pattern#1 assigned to SP4.
You could route GV#2 calls to SP2 via URI with ring pattern#2 assigned to SP2.
lrosenman:
And what would be the settings on both the OBI and the Pi?
Navigation
[0] Message Index
[#] Next page