Google Voice calling out double

<< < (2/2)

SteveInWA:
There is no Google Voice issue that would cause this, and there have been no other reports of this symptom with Google Voice.

You likely have some sort of configuration mistake on your OBi.  I could speculate, but it's not worth guessing.  The best approach would be to:
Log into your OBiTALK web portal page, and completely delete the OBi device off of your account.Wait a few minutes for the device to be deleted and remotely reset.Unplug the Ethernet and power plugs from the OBi.  Remove all but ONE telephone cord/phone attached to the device.  Plug in just the power plug and let it boot up.Pick up the phone handset and key in ***8 then 1 to restore the device to factory defaults.  Wait patiently for it to restore, reset and reboot.  After the LEDs stop flashing, remove the power plug, then re-attach the Ethernet cable, and then re-attach the power plug.  Wait while it boots up.At this point, you will have an unconfigured OBi, with only one telephone set, directly attached to the OBi.Go back to your OBiTALK portal page, and use the **5 procedure to add the OBi back to your account.Using the portal, set up one, and only one, SP (SP1), with one service provider; either Google Voice or a SIP provider.  Do NOT make any further customizations nor access the device via its local web page.Test both inbound and outbound calling using that SP and its phone number.
Before doing anything else to the device, report back here with the results.

Navigation

[0] Message Index

[*] Previous page