Call any OBi for FREE Right from Your WebRTC Capable Browser !! How ?
YASH:
^^^ Thx folks.
First of all, thx for yr kind co-operation and help.
Honestly, I do not have any smart phone.
But I have created two sip accounts, as you mentioned with two diff e-mails, ( numeral digits )
One for myself ( OBI piece ) here in USA
Other for my relative in India, who carries Samsung S5.
Please advise for the next to do. Thx.
YASH:
Quote from: giqcass on March 31, 2015, 04:58:43 pm
Quote from: YASH on March 31, 2015, 07:56:34 am
i am dialing to a cell in India ( from USA ) via **9 and it's 9 digit ID code of the other end,...
the errror is coming,..---
Was rejected by the provider - reason 404
That error suggest to me that the Obion app may not have been running on his phone at the time you made the call. The recommendation by azrobert might be best at this point. I don't think Obihai is going to update the Obion app anytime soon.
In fact, all steps were executed, just like you had mentioned in your previous posts, here.
I tried calling 6-8 times, and it was coming up, with the same error.
And, he could even called me, very first time ( from his Samsung S5 ) and I could talk for 1-2 sentences and then suddenly it disconnected and thereafter the voice went on being muted,.. n' all disorders,..etc., for all later attempts from his side and it did not work out.
dircom:
Does your friend have internet service?
if so why don't you send him an Obi?
YASH:
^^ I had also done last time for him, ( for making an account for him, if you had read few posts here ) as he is an olderly person and not much computer literate, not knows what is OBI and what I have here as a device,.... or no nothing.
More he finds it bother-some n' complicated, he may quit and won't go for it.
I am just trying to make his life easier, and once it's all set and established,.. it will work forever.
----
He and me call each other once in a month hardly, and hence even by sending an OBI, ( in fact, I have two OBI200 new pieces recently bought )hence he would not prefer to do wiring by finding an extra Ethernet connection port in his router/modem ( he may have it or not ) and placing one extra phone on the table just for me, for calling hardly once in a month, or getting that phone as well as the piece been plugged to the electricity (24/7) by using the pin voltage converter extensions..etc, also as you know in the East, the rooms and places are crowded, congested and electric points are 8 feet up the floor and only at one place in a room, so he would never get that wire hanging for the power for that piece and the phone, just for me who is not even a frequent caller,..... etc. So, these are the problems there,.. ! I guess, if you had lived there, you'd understood quickly. :)
azrobert:
OBi2xx:
Service Providers -> ITSP Profile D SIP -> ProxyServer: sip2sip.info
Service Providers -> ITSP Profile D SIP -> X_DnsSrvAutoPrefix: Checked
Voice Services -> SP4 Service -> AuthUserName: The numeric portion of your Sip2Sip UserID
Voice Services -> SP4 Service -> AuthPassword: Your Sip2Sip PW
Voice Services -> SP4 Service -> X_ServProvProfile: D
Check SP4 to see if it registers to Sip2Sip
Status -> System Status -> SP4 Service Status
SmartPhone:
Install Zoiper IAX SIP VOIP Softphone
When you start Zoiper you will get message "Get Zoiper Gold"
Select Cancel
Click Config
Click Add Account
Message "Do you already have an account?"
Reply - Yes
Select Manual Configuration
Select SIP
Account Name: Sip2Sip
Host: sip2sip.info
UserName: Numeric portion of your 2nd UserID
Password: your 2nd password
Save
If it registers, there will be a green check next to the account
Hit Back on the phone
Select Dialer
On the OBi2xx dial **412345678
Change 12345678 to the smartphone's Sip2Sip account number
On the smartphone's Zoiper dialpad dial 87654321
Change 87654321 to the OBixxx's Sip2Sip account number
__________________________________________
If you have a Windows PC, you can test the setup with the Phonerlite softphone
Download and install:
http://www.phoner.de/PhonerLiteSetup.exe
When you start Phonerlite I think a wizard will popup because no accounts are defined.
Proxy: sip2sip.info
Click right arrow.
User Name: (The numeric portion of the 2nd Sip2Sip UserID)
Password: 2nd Sip2Sip account PW
Click right arrow.
Change Profile Name: Sip2Sip
Click check mark
You should have a green circle indicating you are registered.
Dial the OBi's Sip2Sip UserID and click the green phone symbol.
Click red phone symbol to hang up.
_______________________________________________
If your friend/relative is that computer illiterate, will he be able to install a softphone and configure it?
Navigation
[0] Message Index
[#] Next page
[*] Previous page