Moving Aveno 911 service from OBi100 to OBi202

(1/3) > >>

Waterstone:
I bought a OBi100 for testing and checking out the service of VOIP.  Now that I find it is all good, I bought a OBI202 to take care of more lines. 
Is it possible, or how is it done to move the Aveno 911 service from the OBi100 to the OBi202.  I will also be moving over the phone number I have with ring.to from the 100 to the 202.

ceg3:
I believe you should be able to extract the SIP user name and password credentials either from your Anveo dashboard or from your current OBiTALK SP set up for Anveo 911 and insert them into the SP of your choice on your new OBi.  The connection should be automatic.  You have E911 on your home address for 12 months, not the device.

Waterstone:
I have successfully moved over the Aveno service.. one problem... I have PP on SP1 which has full 911 service... SP2 has my ringto which needs the Aveno 911 service.  I notice that the programming shows that the SP3 is registered, however the emergency service for SP1... How do I change the programming so the SP3 is the emergency routing for SP2 and not SP1.
                                                        Phone 1             Phone 2
Primary Line for Outgoing Calls Route to:  SP1                  SP2
Phone Rings on Incoming Calls from:      SP1,SP2,SP3    SP2,SP3
Voicemail Notification Alert from:                SP1               SP2
Emergency Service Call Routes to:              SP1            SP1 ***** this is the one I need SP3

lrosenman:
why can't the PP 911 serve as the 911 for the DEVICE, I.E. ANY phone that dials 911, uses PP?

ceg3:
You only need one E911 service.  To test it pick up any line and dial 933 for a 911 test.  You should get a positive result for all services.

Navigation

[0] Message Index

[#] Next page