Setting up Obi202 to work with Google Voice and 2 lines with PhonePower

(1/3) > >>

MParente:
I figure I would start a new topic instead of adding to my other thread of "flashing green light" as this is a different issue.

When I initially set up my Obi202 and registered it I had decided to put it on SP1. I then added 2 VOIP service lines with PhonePower on SP2 and SP3. Is Phone 1 and Phone 2 linked to SP1 and SP2 respectively?

If so I am thinking it would be better to change Google Voice to go on SP3 and move the other 2 lines to SP1 and SP2 so I can stick the phone cable for the Base Phone for the first line and the phone cable for the second line in the other line on the Obi202.

Any and all answers appreciated.

Thanks.

 :)

lrosenman:
no need to move stuff around.  You can change the setup to ring which ever phone(s) you want from whatever sp(s) you want.

Configuration Name
Primary Line for Outgoing CallsPhone 1Phone 2
Incoming Calls Will Ring OnPhone 1Phone 2

on each SP and set as appropriate.

I have mine set for GV1 (mine) as the default out for Ph2, and rings on ALL sp's (GV1, GV2, Vitelity, Asterisk),

On GV3 the default out for ph2, and rings on ALL sps.

Does that help?

MParente:
Hi Iroseman,

Thank you for your response.

I followed you perfectly up to your second paragraph. I did not follow you so well thereafter.

Where and how would I do what you say?

Thanks.

 :)

lrosenman:
under each SP on the portal, in the configuration screen, there are 2 rows:
1) primary line for outgoing calls
2) incoming calls will ring on (which ph's)

set each SP up  the default for which ever phone port you wish as the outgoing
and set up which ph's each should ring.

You can have MULTIPLE SP's ring each phone port.  (and the ring patterns can be adjusted in expert).

Does that help?

MParente:
Thank you for that Iroseman.

Ok ... I can see where this needs to be changed. I'm not sure about the fine details as you mention.

Do you know of any documentation or a resource that goes into great detail on how all this works on the Obi202?

Thanks again.

 :)

Navigation

[0] Message Index

[#] Next page