Freephoneline, voip.ms, and googletalk dialplan request
Webslinger:
Hi,
I've been having a lot of difficulty getting an OBi202 dialplan working properly, and I'm a complete n00b. If someone would assist me in coming up with a working dialplan, I would really appreciate it.
I am only using 1 physical phone jack.
SP1 is freephoneline.ca
SP2 is voip.ms (outgoing only)
SP3 is google voice
A) I would like all 10 digit outgoing calls (area code + phone number) going through SP1. Also need 911, 311 dialing to 416-392-2489, *98 for voicemail, and *67 for occasional outgoing blocked caller id.
B) I would like 11 digit ((1+area code+phone number) dialing to automatically go through SP3 (google voice)
c) I would like to dial #1 to use voip.ms for everything else
I have tried all of sorts messing around with my own dial plans that I thought would work, but everything I'm trying fails; and I'm becoming pretty frustrated.
If someone could provide me a proper digit code and outbound call route for phone port 1 and the proper digit maps for profiles A, B, and C, I would really appreciate it.
Thank you (and sorry in advance for being so stupid)
azrobert:
Physical Interfaces - PHONE 1
DigitMap:
([1-9]S9|[1-9][0-9]S9|*98|*67|*67[2-9]xxxxxxxxx|311|911|1xxxxxxxxxx|[2-9]xxxxxxxxx|#1XX.S3|**0|***|222222222)
OutboundCallRoute:
{**0:aa},{***:aa2},{222222222:pp},{(Msp1):sp1},{(Msp3):sp3},{(Msp2):sp2}
Service Provider -> ITSP Profile A -> DigitMap:
([2-9]xxxxxxxxx|<311:4163922489>|*67|*67[2-9]xxxxxxxxx|*98|911)
Service Provider -> ITSP Profile B -> DigitMap:
DigitMap: (<#1:>XX.)
Service Provider -> ITSP Profile C -> DigitMap:
DigitMap: (1xxxxxxxxxx)
I didn't know if you just dial *67 or *67 plus a 10 digit number, so I allowed for both.
Dialing #1 plus a number will be routed out SP2.
When you code XX. in a digit map there will be a 10 second delay.
I changed it to a 3 second delay.
If you get more specific with the format of the numbers dialed, you can improve on this.
222222222 is the OBi echo test.
Webslinger:
Wow, thank you very much!
I'm going to try this out right now!
azrobert:
I just helped someone else with almost the same configuration.
I copied my suggestion for him and made changes required for you.
That's why my fast response.
You might want the look at that topic.
It could help you understand how to configure the OBi.
http://www.obitalk.com/forum/index.php?topic=9107.0
azrobert:
I had a coding error.
I changed the following from (#1XX.)
Service Provider -> ITSP Profile B -> DigitMap:
DigitMap: (<#1:>XX.)
Navigation
[0] Message Index
[#] Next page