Freephoneline, voip.ms, and googletalk dialplan request

<< < (2/9) > >>

Webslinger:
Quote from: azrobert on December 08, 2014, 08:34:08 am


I didn't know if you just dial *67 or *67 plus a 10 digit number, so I allowed for both.



Thanks a lot for helping me. I really appreciate it.

The only thing is I don't want *67 to be dialing out (to a service). I just want *67 to disable caller id, for the current phone call only, in the ATA device/Obi202.

For example, if I dial *67 to freephoneline, I get an automated voice message stating "this call is not covered by your tariff plan."

What modification should I make in the dial plan?

Thanks again

Webslinger:
Do I just remove "*67|*67[2-9]" from the two Digit Maps?

azrobert:
You must remove those rules from the DigitMaps.
This Star Code is already defined on the OBi.
It is found here:
Star Codes -> Star Code Profile A

azrobert:
The OBi can't block outbound CallerID.
Your provider must support this function.

Webslinger:
Quote from: azrobert on December 08, 2014, 09:31:23 am

You must remove those rules from the DigitMaps.


Quote

DigitMap:
([1-9]S9|[1-9][0-9]S9|*98|*67|*67[2-9]xxxxxxxxx|311|911|1xxxxxxxxxx|[2-9]xxxxxxxxx|#1XX.S3|**0|***|222222222)


Service Provider -> ITSP Profile A -> DigitMap:
([2-9]xxxxxxxxx|<311:4163922489>|*67|*67[2-9]xxxxxxxxx|*98|911)

So, I would remove "*67|*67[2-9]xxxxxxxxx", correct?

Navigation

[0] Message Index

[#] Next page

[*] Previous page