Disabling ObiTalk service has no effect

(1/3) > >>

shap:
Hi,

I see a strange bug - if you go to Voice Services -> OBiTALK Service Settings, and remove check on "Enable", you still (after reboot) will see that ObiTalk is connected and you still be able to make a calls using the ObiTalk network (I just dialed using my iPhone through my Obi110 gateway).

So basically, this setting has no effect. Can anyone confirm this issue ?

RonR:
When I disable the OBiTALK service, I see "Status Disabled" and any attempts to make calls from the OBi gets "There is no service available to complete your call."

shap:
Just wait for some period - you will see that "Disabled" will turn to 'Normal". I do not remember how much time this should take - I just rebooted and will update you when it happens.

shap:
It takes about an 10-15 minutes - and you will see it re-enable itself

jimates:
If you managing your obi from the web interface you have to disable auto provisioning or all settings will be overwritten by the Obitalk settings.
Web Interface > System Management > Auto Provisioning - set to "disabled"

If you are managing from the "Expert Device Settings" from the dashboard, you do not need to change the provisioning, it will automatically be set to "periodically" by Obitalk.

Navigation

[0] Message Index

[#] Next page