[SOLVED] Obi110 reboots during the call

(1/2) > >>

tintin11:
Hi all,

I am using my Obi110 device in India. The plan is to use my friend's Obi110 device as a voice gateway in the US to make free calls. He has GV setup on his device and I am planning to use that.

But I noticed that my device reboots every time he makes an ObiTalk (device to device) call.  The call would last
for a few minutes and my device reboots with 'Reason: 92, lifecycle: 158'. Sometimes it happens right away after
the incoming call is connected.

Does anybody know what it means ?




[May 21 11:24:41][192.168.1.167]<7> RTP:?Msg in tcp buf(120/21301)

[May 21 11:24:41][192.168.1.167]<7> RTP:?Msg in tcp buf(144/21076)

[May 21 11:24:41][192.168.1.167]<7> RTP:?Msg in tcp buf(428/21042)

[May 21 11:24:50][192.168.1.167]<6> ==== Networking is ready ====

[May 21 11:24:50][192.168.1.167]<0> IP Address= 192.168.1.167
[May 21 11:24:50][192.168.1.167]<0> Gateway   = 192.168.1.1
[May 21 11:24:50][192.168.1.167]<0> Netmask   = 255.255.255.0
[May 21 11:24:50][192.168.1.167]<3> SYSTEM REBOOTED (Reason: 92, lifecycle: 158)


[May 21 11:24:50][192.168.1.167]<0> SLIC_init ...
[May 21 11:24:50][192.168.1.167]<0> Reset SLIC...
[May 21 11:24:50][192.168.1.167]<150> Setup Provisioning for system start! 1000

[May 21 11:24:52][192.168.1.167]<0> SLIC & DAA is initialized
[May 21 11:24:54][192.168.1.167]<6> Start Main Service Now
[May 21 11:24:54][192.168.1.167]<7> Voice Main

[May 21 11:24:54][192.168.1.167]<7> [CPT] --- FXS s/w tone generator (ringback)
---

[May 21 11:24:54][192.168.1.167]<7> BASESSL:load cert:5

[May 21 11:24:54][192.168.1.167]<7> BASESSL:Load certificate ok

RonR:
Do you have the latest firmware loaded?:  v1.2.1 (Build 2286)

tintin11:
Yes that's the one I have on my device:

[from webpage] System Status: SoftwareVersion   1.2.1 (Build: 2286)

yhfung:
You may consider to disable the auto-provisioning function of your OBi device and see how it goes.

YH

tintin11:
disabled auto provisioning and then tried one inbound obi-to-obi call.. but got the same error msg.

SYSTEM REBOOTED (Reason: 92, lifecycle: 286)

Does anybody know what it means by Reason #92?   This reason doesn't show up in the System status under
UpTime. But the Admin Guide says we should see the Reason number upon a reboot.

Any suggestions how to to fix this reboot problem ?

Navigation

[0] Message Index

[#] Next page