Obi wifi setup won't connect to the internet

<< < (3/3)

Angelc19:
I used The LAN method and got it up.
Thanks again

camara25:
HI all,

I just got the ObiWifi and tried to set it up on my obi200. Long story short.....the instructions given to set the ObiWifi up don't work. I had to set it up by connecting directly to the router via Ethernet. I manually entered the Ip Address, Subnet Mask, Default Gateway, and DNSserver1 values in wifi settings and disabled autoprovisioning with Obitalk as it was always overriding the wifi settings.

Now I am finally able to receive calls while on the ObiWifi connection, but I cannot make any outgoing calls. when I dial out a number a message comes on saying "the number you dialed has not received a response from the service provider". Anyone else have this issue and know how to fix it???

Thanks

eswensen:
Camara25,

I did what you said and manually entered the IP address, etc.  This finally activated my USB wifi dongle and I was able to set up the dongle, but couldn't make/receive phone calls.  I realized that the LAN IP address and wifi can't use the same IP address, so I manually removed the IP address and rechecked the default box.  This seemed to fix the problem and I can know make/receive phone calls by using wifi.

Navigation

[0] Message Index

[*] Previous page