Call OBi WebRTC: HTML code to incorporate into my web site

(1/2) > >>

Vegetus:
Hi there!

I hope this is the right area to ask for HTML/Java Script code to incorporate the WebRTC feature into my web site.
Of course, I don't want to allow to call out to any ObIHai box, only to the device I own.

Any help will be appreciate.

Alessandro.

Usetheforceobiwan:
If you can't find an Obihai only solution, you could always look to Ring.to which offers a WEBRTC click to call website for your/their DID's.  The website address click to call ends up being  https://ring.to/yourchosenusername.  Anyone with that URL can call your Ring.to endpoints by using a WEBRTC compatible browser.  Once they get to your URL, all they have to do is enter their name before a call will go through.

Another choice is getonsip.com which is a SIP only solution (they don't have DID's although their parent company Onsip offers them).  You can set up a getonsip account and make it an SP on your Obi.  You then give out a customized URL https://www.getonsip.com/call?a=yourchosenusername which anyone can click to call your Obi directly from a WEBRTC compatible browser.  Getonsip is nice in that you can register multiple endpoints to the same account so you can simultaneously ring up to 10 devices for incoming calls.  That should cover you just about anywhere you are.  Big plus too is that they offer WEBRTC video calls from browser to browser endpoints.  It uses the same URL mentioned above that you can make audio only calls on.

Vegetus:
Thank You very much for your reply. I will check both of the services you mentioned specially getonsip. WebRTC Video Calls is a really interesting feature.
Again, thank you very much!  :D

Alessandro

HelloG:
Quote from: Usetheforceobiwan on January 02, 2015, 05:48:45 pm

Another choice is getonsip.com which is a SIP only solution (they don't have DID's although their parent company Onsip offers them).  You can set up a getonsip account and make it an SP on your Obi.


Hi could you help me with setting up my getonsip account as SP2 on the Obi110?  Trying to match up the getonsip profile parameters with the fields in ObiTALK configuration but I'm not getting them correct, so ObiTALK says "service not configured" which I'm assuming means registration failed. Here are the ObiTALK fields:

Service Provider Proxy Server
Service Provider Proxy Server Port
Outbound Proxy Server
Outbound Proxy Server Port
User Name
Password
URI

And here are the getonsip parameters:

SIP Address
Username
Domain
SIP Password
Auth Username
Outbound Proxy

How do they match up?  Thanks.

azrobert:
Usetheforceobiwan,

Thank you for this post.


HelloG,
 
This is how I defined the trunk:
Service Providers -> ITSP Profile B -> SIP -> ProxyServer: getonsip.com
Service Providers -> ITSP Profile B -> SIP -> X_DnsSrvAutoPrefix: Checked
Voice Services -> SP2 Service -> AuthUserName: getonsip_userid
Voice Services -> SP2 Service -> AuthPassword: password
Voice Services -> SP2 Service -> URI: userid
Voice Services -> SP2 Service -> X_ServProvProfile: B

Navigation

[0] Message Index

[#] Next page