Call OBi WebRTC: HTML code to incorporate into my web site
HelloG:
Hi azrobert,
I've followed the settings you posted, and if look in the phone status, it shows SP2 as being registered, although on the dashboard, Obi still shows "service not configured". But maybe that doesn't matter because I tried calling my Obi from GetOnSip and it worked! Some things I'm not clear on:
In your configuration it seems you are not using OutboundProxy setting suggested by Getonsip (sip.onsip.com) suggested by Getonsip. Is that not necessary?Using ObiTALK configuration, the only setting that did not match yours was:
Service Providers -> ITSP Profile B -> SIP -> X_DnsSrvAutoPrefix: Checked
So I went in to ObiExpert and turned it on.
azrobert:
I don't use OBiTalk to configure my OBi's. I only used OBiTalk to configure GV then switched to the local interface. I THINK the dashboard only shows the SP as configured when you use a wizard and not OBI Expert.
The outbound proxy is used for outbound calls. Since we are only receiving calls, I didn't include it in the configuration.
I couldn't get the OBi to register to GetOnSip. I guessed and turned on SRV support, fixing the problem. SRV allows a provider to use 1 or more proxies. They can swap proxies without disrupting their users. getonsip.com is not the real proxy, but points to another proxy.
To see the real proxy (sip.onsip.com) type the following in the Windows Command Prompt:
nslookup
set type=srv
_sip._udp.getonsip.com
Edit:
I know some softphones include SRV support without having to turn it on. Maybe that is why it's not in their setup.
Usetheforceobiwan:
Quote from: azrobert on January 03, 2015, 10:49:27 am
The outbound proxy is used for outbound calls. Since we are only receiving calls, I didn't include it in the configuration.
As Getonsip does not support DTMF dialing, if you get outbound working you can setup some Obi speed dials to make SIP to SIP calls via the Getonsip SP. Here is a nice list of SIP URI numbers you can use to test. http://www.voip-info.org/wiki/view/Phone+Numbers.
And don't forget you could get a free IPKall DID and forward incoming to your Getonsip Obi SP via SIP forwarding. This gives you a half way bridge to the PSTN. That means anyone can get in touch with you either through the PSTN or by WEBRTC.
Navigation
[0] Message Index
[*] Previous page