Call Forward (unconditional) & dialling out on Obitalk 200 ---Help needed.
realjohny:
Hi,
I initially want to achieve two things by my Obitalk200. Need help from members & support to achieve it.
1- Unconditional Forwarding of incoming calls on my Obitalk + Google Talk + PSTN line (connected with ObiLine) to my one GSM number via Obi-Bluetooth.
*I have a mobile phone connected to Obitalk via Bluetooth dongle.
2- Calling mobile paired with ObiTalk200 from my mobile ...and then dialing out (via Google Talk OR PSTN line OR ObiTalk) to a remote ObiTalk200 (which is connected with PSTN line via ObiLine) and then making calls via remote PSTN.
2nd Scenario more in detail that I want to achieve.
Mobile Phone in hand calling ....> Mobile Phone paired with ObiTalk ...>unconditional dialing to remote ObiTalk200 connected with PSTN line (via ObiLine) ...getting dial tone ....Dialing out number.
Please help to achieve this, if possible ..step by step.
Many thanks :)
Johny.
azrobert:
1- I'm not sure what you want. Do you want to forward inbound PSTN calls using your mobile connected via BT to another number? If yes:
Physical Interfaces -> Line Port
CallForwardUnconditionalEnable: Checked
CallForwardUnconditionalNumber: bt1(14808370001)
The OBi doesn't really forward the call. It bridges the call out another trunk and makes a new call, so the person receiving the call will see the callerid of the mobile connected via BT.
2-
Local OBi:
Voice Services -> OBiBlueTooth1 -> InboundCallRoute:
{(1?4808370001):pp(510222222*9)},{ph,ph2}
Change 4808370001 to your mobile's callerid
Change 510222222 to the OBi number of the remote OBi.
Remote OBi:
Voice Services -> OBiTalk Service
Add to the beginning of the InboundCallRoute:
{510111111>(<9:>):li},
If the only rule in the InboundCallRoute is "ph" do this:
{510111111>(<9:>):li},{ph}
Change 510111111 to the OBi number of the local OBi.
realjohny:
azrobert,
Thank you for your help. I think I have been able to explain 2nd scenarion and will try after setting it up.
For 1st scenario I want to transfer all incoming calls on local ObiTalk (Google Talk, PSTN and other VoIP calls) to my GSM number. For that I have another mobile phone paired with ObiTalk and having an unlimited calling out plan for GSM number I carry. So can I route all incoming calls to GSM network ? I think you mentioned for PSTN line only, how to achieve this for GV and any VoIP service, can you please help.
azrobert:
All the trunks have the same options.
Do the same as the Line port for each trunk.
They are found at:
Voice Services -> SP1 thru SP4 Service
azrobert:
You can get the original inbound callerid If you don't mind running an SIP softphone on your receiving mobile. You would not use your mobile connected to BT.
It's a more difficult setup, but not that much more. If you are interested tell me if you have an SIP provider (non GoogleVoice) defined and what SP you used for the definition.
Edit:
You need a data plan on your mobile.
Navigation
[0] Message Index
[#] Next page