Phones Keep Ringing After Answering OBi 202
fjl332:
I use an OBi 202. At one time I was only using one port to feed a set of cordless phones, because I had a DSL signal coming into the house. Then I converted to Cable Internet and freed up the phone wiring so that there is no signal coming in to ruin the OBi. At that point I connected the second port (phone jack on the OBi) to feed the house wiring and activate all the other wired phones. Now, when the phones ring, we can pick up on any phone. However, if we pick up on the cordless set, the wired phones keep ringing. Likewise if we pick up on the wired phones, the cordless phones keep ringing. It's rather annoying. Both ports are set in my configuration as outbound and inbound ports. Is there something I need to change to have all the phones behave the same way?
giqcass:
Did you set up the same GV account on 2 SP slots? If so that might be the issue. It should be set up on only 1 SP slot. One account registration is capable of ringing both phone ports. Then both lines can be set to use that SP as the default outgoing line.
fjl332:
No, I have Google Voice on SP1 and Freephoneline on SP2. A while back I did not have Google Voice set up on SP1, only Freephoneline on SP2 and the problem was the same. :-(
giqcass:
Are you forwarding one to the other?
azrobert:
What happens if you don't use the house wiring and connect a phone directly to Phone Port 2?
You can probably fix the problem by connecting the house wiring to Phone Port 1 using a splitter like this:
http://www.ebay.com/itm/Almond-Duplex-Phone-Splitter-Adapter-ALMOND-DUPLEX-ADAPTER-/291327658858?pt=US_Phone_Cords_Jacks_Plugs&hash=item43d47b4b6a
If you don't have one, the dollar stores usually carry them.
Since all the phones are now connected to Phone Port 1, you can only have one call in session at any point in time.
Edit:
Reconnect to the house wiring if the 1st test works properly, but only have the phone you used connected and all the other phones disconnected.
Navigation
[0] Message Index
[#] Next page