UKDDI Config Help Obi200
WelshPaul:
Did you do the following on your UKDDI account:
List > YOUR DDI NUMBER > Edit > and under DDI - edit number routing > Route: register then click on create.
(Type the word register in the route perameter field)
I have an Obi200 in a draw somewhere, can dust it down and setup an account on it later. If I got it to work on on the Obi1032 ok I see no reason why it wouldn't work just fine on the Obi200.
WelshPaul:
Just an update, got it working again using the above steps on an Obi200.
See here: https://www.ukvoipforums.com/viewtopic.php?f=25&p=1065#p1065
Also tested it again on my Obi1032 and it worked just fine on that device also.
GSD1:
Quote from: WelshPaul on January 27, 2015, 04:55:49 am
Just an update, got it working again using the above steps on an Obi200.
See here: https://www.ukvoipforums.com/viewtopic.php?f=25&p=1065#p1065
Also tested it again on my Obi1032 and it worked just fine on that device also.
Oops the UKDDI number rings but I cannot hear the caller on the other side calling in?
Any thoughts? Thanks.
GSD1:
Btw the number is registered in Obi and UKDDI
WelshPaul:
You initially said it works, did it ever work?
What your saying is that when someone calls your UKDDI number the telephone attached to your Obi rings but when you answer the call you cannot hear the caller? Can they hear you?
When you reboot the Obi and call your number do you get the same issue or does it appear after a period of time?
Most one way sound problems are caused by firewalls restricting incoming connections. For hardware phones the firewall issues are always found in the router.
Check the stats to see if your capturing the RTP packets coming in.
EDIT: One thing I noticed is that I forgot to say is that the RegisterExpires parameter needs to be changed from 3600 to 60. I just tested an inbound call and it worked just fine for me so if the problem persists for you after you make the change below we will need to look at your NAT/Firewall.
Service Providers> SIP > ITSP Profile A > RegisterExpires: 60
Give that a try and report back.
Navigation
[0] Message Index
[#] Next page
[*] Previous page