UKDDI Config Help Obi200
GSD1:
UKDDI line never worked for voice calls phone does ring when the UKDDI number is called. When I pick up the handset no one can hear anything. All I hear is the UKDDI number ringing on the dial out phone even when the call is answered.
The registerexpires is set at 60 on the Obi and UKDDI profile.
No improvement after rebooting the Obi or modem. I have Google Voice and Freephoneline.ca working okay on SP1 and SP2.
WelshPaul:
I have found the problem, please log into your UKDDI account and remove the tick from the 'Send DDI in INVITE:' box located at 3c > Numbers > registration.
I added this to my setup as I run an asterisk server. It went right over my head that the average user may be just connecting directly via their IP phone or adapter. Sorry
GSD1:
Still getting the same problem UKDDI number rings once the phone is picked up I cannot hear anyone but the UKDDI still keeps ringing. Once the UKDDI phone ends the dial tone returns.
I removed the tick mark from send DDI invite
WelshPaul:
Wow I was sure I nailed it with that fix! I had no audio either way with Send DDI in INVITE enabled when registering directly bypassing my PBX. Disabling it fixed that.
OK well from here on in we have two choices:
1. Factory reset the device and set it back up locally as per: https://www.ukvoipforums.com/viewtopic.php?f=25&t=417 and test again before configuring anything else. (You can backup your device prior to resetting)
2. You setup port forwarding on your router just in case it's a firewall problem.
GSD1:
Tried a reset configuration and then set it up locally as per your ukvoip setup but I get the same problem.
This is the status for UKDDI:
Registered (server=87.117.68.12:5060; expire in 38s)(UAP:5062)
I can use FPL and GV on SP 1 and SP 2
Navigation
[0] Message Index
[#] Next page
[*] Previous page