UKDDI Config Help Obi200
drgeoff:
Typically the only 3 pieces of info needed are:
1. SIP server - sip.ukddi.com goes in Service Providers/ITSP Profile B/SIP/Proxy Server
2. SIP account name - XXXXXX goes in Voice Services/SP2 Service/SIP Credentials/AuthUserName
3. SIP password - goes in Voice Services/SP2 Service/SIP Credentials/AuthPassword
Plus (maybe this is your problem):
Change Voice Services/SP2 Service/SP2 Service/X_ServProvProfile from the default 'A' to 'B'.
Above assumes you have GV on SP1 and want UKDDI on SP2.
If still not working what is shown at Status/System Status/SP2 Service Status (or whatever SP you are configuring for UKDDI)?
WelshPaul:
I have a test account registered against my OBi1032 and it works just fine...
I have it registered against ITSP Profile F and SP6 Service so -
ITSP Profile F > SIP > ProxyServer: sip.ukddi.com
SP6 Service > X_ServProvProfile: F
SP6 Service > AuthUserName: 1234567
SP6 Service > AuthPassword: MY PASSWORD
Save and reboot!
If I go to Status > SP6 Service Status I can see my device has successfully registered and I'm ready to start receiving calls.
Regarding my 3c.co.uk account I have set:
Registration > Registration interval: 60
Registration > Send DDI in INVITE: Ticked
Registration > Caller ID type: UK
Registration > DDI format: UK
If you get some recorded message when attempting to call your DDI then:
List > YOUR DDI NUMBER > Edit > and under DDI - edit number routing > Route: register then click on create.
Your OBi should now ring when someone calls your DDI. (mine does)
GSD1:
UKDDI now has a status as registered in Obi200
When I dial the number it does not ring though?
Any advice?
Thanks
drgeoff:
Quote from: GSD1 on January 25, 2015, 01:06:26 pm
UKDDI now has a status as registered in Obi200
When I dial the number it does not ring though?
Any advice?
Thanks
Not reaching your OBi or not ringing the phone connected to your Obi?
If you are getting ringing tone on the calling phone, look at Status, Call History on the Obi's local web page to see if the call is shown or not.
GSD1:
I can dial the UKDDI phone number and hear it ringing on my callout phone but does not ring on the Obi nor does it show up on the status, call history on the obi local webpage.
I am in Canada and I asked my parents in the UK to call my UKDDI number and they get the same issue
Navigation
[0] Message Index
[#] Next page
[*] Previous page