Are OBi 100 & 200 Mod. Still Compatible w/ NEW Phone Power Users + Re-set or Not
scoleman.69@gmail.com:
Hi Folks,
Tried search, no luck so ask'n....
We presently have Phone Power VoIP service via an older OBi 110 which is working fine.
However, trying to help a friend get set up w/ a VoIP preferably using an OBi box, probably the OBi 200, and going with Phone Power but in perusing the PP site they specifically do NOT show any of the OBi 100 or 200 series units in their listing of BYOD units.
They only list the OBI1032, OBI1062 and OBI508 models.
Haven't had a chance to ask PP directly as they're not open until business hours tomorrow so thought I'd ask here to see what Ya'll knew.
Also, in regards to Google Voice now being compatible again, if I understand it correctly, if I wished to use the old 110 for GV I have I'd need to 'flash' it's firmware. If I do will it prevent me from reverting back to using it with Phone Power via my current acct.
Can I set it up with PP as SP1 and the GV number as SP2?
TIA,
Steve
drgeoff:
The OBi1xx and 2xx devices should still be fine with PP.
Upgrading 110 firmware should not prevent it working with PP.
Yes, you can have PP on SP1 and GV on SP2.
scoleman.69@gmail.com:
Quote from: drgeoff on January 12, 2015, 02:28:19 am
The OBi1xx and 2xx devices should still be fine with PP.
Upgrading 110 firmware should not prevent it working with PP.
Yes, you can have PP on SP1 and GV on SP2.
Thanks for the response. It's what I expected, but couldn't find any confirmation and given my life experiences I don't take chances on presuming anything is as it should be.
While you're available, and interested in my queries... At the risk of asking what is surely easily found or figured out, I'd appreciate humoring me and saving this po OF the trouble... if one has PP on SP1 and GV on SP2 will the associated phone set ring with incoming calls to both the PP and the GV number, and if so is there any settings to allow determining which number is being routed through, say via some settings in 'OBi Expert Configuration Menu' that would create distinctive rings, or some such?
TIA,
Steve
drgeoff:
Yes you can set different ring cadences for each Voice Service.
Under Voice Services, SPx Service, X_RingProfile has choice of A or B. Further down that page is X_DefaultRing where you select 1 to 10.
Under Ring Settings, each of A and B has the 10 editable Ring Patterns.
scoleman.69@gmail.com:
Quote from: drgeoff on January 12, 2015, 03:57:31 am
Yes you can set different ring cadences for each Voice Service.
Under Voice Services, SPx Service, X_RingProfile has choice of A or B. Further down that page is X_DefaultRing where you select 1 to 10.
Under Ring Settings, each of A and B has the 10 editable Ring Patterns.
Well, I'm with you all the way to those respective choices only I can't seem to remember, nor figure out how to get it to permit changes, as those particular ones remain 'ghosted out' and unclicking OBiTalk Setting box doesn't 'release' them. What do I need to do in order to be allowed to effect the changes for those settings?
TIA,
Steve
Navigation
[0] Message Index
[#] Next page