Register Failed: No Response From Server

(1/2) > >>

i68040:
Hi everyone,

I just purchased an ObiTalk 202 device for use with the Plivo SIP provider. Unfortunately when I try to configure the device I see this message on the system status:

Quote

Register Failed: No Response From Server (server=54.241.2.206:5063; retry in 10s)


I am able to use these settings in the MicroSIP SoftPhone without trouble, so it surprises me to see the OBI202 not behave:

SIP Server: phone.plivo.com
SIP Proxy: phone.plivo.com:5063
user: <username>
domain: phone.plivo.com
Password: <password>
Transport: TLS
SRTP: Mandatory

I have the Obi in bridge mode behind a pfSense firewall if that makes a difference. I have configured the X_SipDebugOption option to Log All Messages but I don't see any logs that appear to be SIP related.

My thought is that the obi does not like the TLS proxy as it connects fine without it. For my application I require the TLS proxy. Does anyone have any suggestions for what to try next?

drgeoff:
I'm reasonably certain that 54.241.2.206 is not plivo.

So why is your OBi trying to register there?

Edit. Ignore all that.  It is incorrect.  See below.

Taoman:
Quote from: drgeoff on January 12, 2015, 02:34:05 pm

I'm reasonably certain that 54.241.2.206 is not plivo.



Curious why you say that?

nslookup phone.plivo.com
Server:  UnKnown
Address:  192.168.1.1

Non-authoritative answer:
Name:    reg2.opensips-registrar.plivo.com
Address:  54.241.2.206
Aliases:  phone.plivo.com

drgeoff:
Quote from: Taoman on January 12, 2015, 02:44:51 pm

Quote from: drgeoff on January 12, 2015, 02:34:05 pm

I'm reasonably certain that 54.241.2.206 is not plivo.



Curious why you say that?

nslookup phone.plivo.com
Server:  UnKnown
Address:  192.168.1.1

Non-authoritative answer:
Name:    reg2.opensips-registrar.plivo.com
Address:  54.241.2.206
Aliases:  phone.plivo.com

Hmm!
I looked up 54.241.2.206 and got EC2 Amazon which rang bells as being the server that Obihai/Obitalk uses.  I should have checked that, because I would have seen that it isn't.  My mistake.

So ignore that post.

Mango:
Remember that you need to specify the port number separately, not appended to phone.plivo.com.

Are you sure the port number is 5063?  I thought TLS was 5061.

Navigation

[0] Message Index

[#] Next page