Help configuring Obi100, GV, Anveo E911 service

<< < (2/2)

202Owner:
SPn digit maps [should] default to ...|911|.  Ensure that it is so for Anveo and removed for GV.

If you set the Primary Line to Trunk Group 1, Trunk Group 1 defaults to sp1,sp2.  Ensure that GV is listed first.

The PHONE port digit map and outbound call route default to (...|(Mpli)) and ...,{(Mpli):pli}.  If ...|911| is present, remove it... 911 is already embedded in (Mpli).

If you are going to use Expert Mode, set:
TG1 Trunk Group 1 digit map (Mtg1) = ((Msp1)|(Msp2))
SP1 Service - SP1 Service::X_NoRegNoCall = checked (to speed up trunk group failover)
SP2 Service - SP2 Service::X_NoRegNoCall = checked (to speed up trunk group failover)

GV for everything except 911; Anveo for 911 and failover.

SteveInWA:
This shouldn't require any user manipulation of digit maps or other rule changes at all.  It's standard, vanilla operation via the OBiTALK portal.  The portal allows you to select which service provider to use for outbound calls, and it has a check mark to designate which service provider to use for 911.  Once you do that, the portal itself updates the appropriate digit maps.

jdarwin:
WOW!!!  ;D You guys are great.  Thanks all for the help.  I'll work on this over the weekend and report back my success or help needed next. 

Navigation

[0] Message Index

[*] Previous page