Setup Google Voice to call everywhere BUT Canada?!
RonR:
SPx should be SP2 in your case.
The bolded parts of the PHONE Port DigitMap and OutboundCallRoute are ADDITIONS to the default values, not entire replacement values.
Quickstrike:
EDIT: It seems to be working AFTER the alterations I made below + DISABLING THE FIREWALL [NAT] on my router :)!!
I forget.. is there a way to get around the NAT / Voice Gateway issue? Apparently you can't use STUN, so I am forced to disable NAT 24/7?!
I added "SP2" to the AccessNumber field + changed the PHONE Port DigitMap and OutboundCallRoute.
Now when I try calling an Australian number, there is silence for ~30 seconds.. followed by a series of clicks.. and finally I am left with a dial tone.
Obi Call History:
BetaMax Call Log - says that my calls are between 7-9 seconds long .. even though I hear nothing on my end:
See Top of my Message to see that I have fixed this issue by disabling NAT.
RonR:
Quote from: Quickstrike on May 28, 2011, 11:41:05 pm
Now when I try calling an Australian number, there is silence for ~30 seconds.. followed by a series of clicks.. and finally I am left with a dial tone.
Is the OBi spontaneously rebooting? If it is, the UpTime is usually displayed with no reboot reason code in parenthesis:
UpTime 0 Days 5:42:27
You might want to post your entire PHONE Port DigitMap and OutboundCallRoute. There's no error checking in the OBi and a malformed value can cause the OBi to crash, although that's probably not happening since the call appears to be being processed.
Quickstrike:
That was a quick reply!
Please see my revised post.
I am getting audio now that I disabled NAT :).
RonR:
Since you have a SIP provider registered on SP2, you can add a STUN server on ITSPB and it should be effective on Voice Gateways.
Navigation
[0] Message Index
[#] Next page
[*] Previous page