Incoming calls not reaching Asterisk
mrjoe:
I've setup an Obi110's PSTN port to work with outgoing calls using FreePBX but whenever a call comes in Obi110's Call History shows (404 Error Not Found)
I've tried also sending calls to sp1(PBX's Inbound callroute name@10.100.102.5060) but I get the same error.
Please could someone help me.
drgeoff:
Mrjoe, as someone who has visited this forum enough times to make over 200 posts, you ought to realise that without knowing exactly how you configured both the OBi110 and FreePBX, it is almost impossible for anyone to help. :(
mrjoe:
you're right drgeoff, I'm sorry. I was up so late last night trying to figure it out that I wanted to post the shortest possible post...
I used this without the registration: http://www.obitalk.com/forum/index.php?topic=1157.msg7261#msg7261
I managed to get the calls coming through now by sending Line calls to sp1(600@10.100.102.4:5060) but I don't get any caller id. 600 is a ring group which rings all of my phones.
It just shows "PSTN 210" as incoming caller id (which is the name of ext 210 which is on SP1)
I have ticked spoof caller id in both SPs
Thank you in advance for your help drgeoff
ianobi:
I'm sure you have checked, but I'll mention it anyway - have you checked Call History to see if the OBi110 has actually decoded the incoming CallerID? If it has decoded the CallerID, then you could try this in Line Port InboundCallRoute:
sp1(600@10.100.102.4:5060;ui=$1)
mrjoe:
I did check and it is receiving the CLI properly just not passing it on.
Adding ;ui=$1 didn't seem to do anything unfortunately.
Navigation
[0] Message Index
[#] Next page