Incoming calls not reaching Asterisk

<< < (2/2)

azrobert:
The UI=$1 should work.

Anyway, try setting it back to what you had without the UI then:

Service Providers -> ITSP Profile A -> SIP -> X_SpoofCallerID: Checked

Checking X_ SpoofCallerID includes CName, UI doesn't.

mrjoe:
Actually using ui= stopped the calls coming through to the extensions for some reason.

mrjoe:
I removed "context=from-trunk" and it is now working as it should.

Now I want to adjust the setup to allow me to use the FXS on the OBi110.

Thanks for your suggestions

azrobert:
Pick an extension number for FreePBX, like 700.

Define a Voice Gateway on OBi110:
AccessNumber: sp1(10.100.102.4:5060)
AuthUserID: 700
AuthPassword: 700_PW

Define extension 700 with FreePBX
Change the Dial Parm to: SIP/0@xx.xx.xx.xx:5060

Route Inbound PBX calls to extension 700
xx.xx.xx.xx:5060 is the IP address and port of SP1 on the OBi110.
Make sure SP1 X_InboundCallRoute will accept the call.
Route outbound OBi110 calls to VG.

mrjoe:
Thank you Azrobert - working great now!

Navigation

[0] Message Index

[*] Previous page