Help required choosing the right device for the UK
JeremyW:
@ WelshPaul - HELP! Getting plagued by incoming calls from '100', every few minutes. Never anyone there. When this happened on the Grandstream I had to turn off a setting which was something to do with direct IP calling / dialling. Does that make any sense at all? Trying to find something similar that might help in the 110 settings.
drgeoff:
SIP scanners.
See eg http://www.obitalk.com/forum/index.php?topic=3321.0.
And do a search on the forum for "Oleg method" to try to find a thread that has more suggestions.
WelshPaul:
Oh sip scanners lol
Never had that problem myself! ;D
There are a few ways to resolve this, firstly give this a go...
Navigate to Service Providers > ITSP Profile A > SIP-> X_AccessList
And enter the IP address of VoipCheap. You can find it by viewing the registration status of the SPx line. (Think it's 77.72.169.131) Trouble with this is if the IP address changes your registration will fail and you will need to update or add the new IP address.
or you could enable Voice Services > SP1 Service > X_EnforceRequestUserID
Or see: http://www.obitalk.com/forum/index.php?topic=5467.0
JeremyW:
Quote from: WelshPaul on January 30, 2015, 08:44:41 am
Oh sip scanners lol
Never had that problem myself! ;D
There are a few ways to resolve this, firstly give this a go...
Navigate to Service Providers > ITSP Profile A > SIP-> X_AccessList
And enter the IP address of VoipCheap. You can find it by viewing the registration status of the SPx line. (Think it's 77.72.169.131) Trouble with this is if the IP address changes your registration will fail and you will need to update or add the new IP address.
or you could enable Voice Services > SP1 Service > X_EnforceRequestUserID
Or see: http://www.obitalk.com/forum/index.php?topic=5467.0
Hmmm... no such setting 'X_EnforceRequestUserID' - at least, I can't find it. I've already found that thread on the subject and found it very confusing!
WelshPaul:
I think the best thing for you to do is change inbound call route...
Go to Voice Services > SP1 Service and change the X_InboundCallRoute paramater from {ph} to {>1234:ph}
Change 1234 to your voipcheap userid as you entered in the AuthUserName paramater further down the page.
Navigation
[0] Message Index
[#] Next page
[*] Previous page