Voice gateway for outbound toll-free calling

<< < (2/2)

Sam_from_CircleNet:
I wanted to chime in and mention a free service that CircleNet offers for toll free calling without having to make an account.
You can send toll free calls to tf.circlenet.us using the username tf and password tf. It isn't something we widely advertise and it might go away suddenly if it's ever abused but for the time being it's an option.

Sam

Godzilla:
I had the same issue... tf.callwithus.com was working fine and then stopped starting in early March. I was able to dial out other ways, but tonight I got fed up and swapped out to sip.tollfreeproxy.com...

Under Gateways and Trunk Groups:

Voice Gateway1
Name            Toll Free
AccessNumber    sp1(sip.tollfreeproxy.com;op=n)
DigitMap      <xx.>
AuthUserID   <my number here>


and then under Physical Interfaces....
Phone 1 --- OutboundCallRoute
I added        {(1800xxxxxxx|1888xxxxxxx|1877xxxxxxx|1866xxxxxxx|1855xxxxxxx|1844xxxxxxx):vg1},


Works for me... on my 202.
good luck

202Owner:
Quote from: Godzilla on April 22, 2015, 05:33:26 pm

I had the same issue... tf.callwithus.com was working fine and then stopped starting in early March. I was able to dial out other ways, but tonight I got fed up and swapped out to sip.tollfreeproxy.com...


Current problem?:  CWU is having hardware trouble.

March problem?:  CWU free TF requires a valid US CallerID number.  Using an OBi202, I am able to pass this using this vg1 configuration:

Gateways and Trunk Groups - Voice Gateway1::AccessNumber = sp1(tf.callwithus.com;ui=callerID number)

This passes your CallerID number as the gateway AuthUserID, but no CWU account or AuthPassword is required.

Should work again once CWU's host service fixes their hardware.  Test using ANI Verification by MCI: 1-800-437-7950 will report CallerID number.

Navigation

[0] Message Index

[*] Previous page