Obi 200 with DD-WRT poor outgoing audio

(1/2) > >>

3sk1m0.0ne:
Hi there,

I have just started using an Obi 200 with google voice this week so I am rather new to this.  I am running a obi 200 with a Linksys WRT400N running DD-WRT v24-sp2 (03/25/13) std - build 21061.  I am having an issue with poor out going call quality sometimes my voice is cut in and out of the call.  I am having great incoming audio quality from the caller but unfortunately my voice cuts in and out and is hard to hear.

Does anyone have any suggestions or fixes for this?  I have tried to exempt my obi mac address on qos but haven't had much luck with that. 

Any help would be greatly appreciated.
Cheers!

highgrade:
Disable SPI

ceg3:
It's recommended to disable SIP ALG in all routers.  I have no idea if it might affect your issue but I understand disabling is generally a good idea.  Sound quality can also be affected by CODEC choice.  I am using G711U with my 200.

MikeHObi:
DD-WRT doesn't have SIP ALG to disable.

I use my obi202 through my linksys WRT610N V2.  I didn't have to do anything special for it.  I'm running a very old build 14471M NEWD-2 K2.6 Eko.

Are you sure you have sufficient bandwith for uploading?  Maybe try a different port on your router?

WelshGap:
I am having the same problem with the Obi 200 using Google Voice.  They say it is happening more when I talk loud.  I have not yet found a fix.  I have made the changes to the the OBI configuration per the "My audio is breaking-up and choppy" settings recommended in FAQ.  If you have not done that it might help you.

Navigation

[0] Message Index

[#] Next page