obi110 france for powervoip how to start up
WelshPaul:
If its powervoip.com you're using see: http://www.powervoip.com/sip
SIP port : 5060
Registrar : sip.powervoip.com
Proxy server : sip.powervoip.com
Outbound proxy server : leave empty
Account name : your PowerVoip username
Password : your PowerVoip password
mandm:
yes the test number works and I hear my own voice echo back. :)
Generic Service Provider - grandma
Service Provider Proxy Server sip.powervoip.com
Service Provider Proxy Server Port 5060
Outbound Proxy Server -
Outbound Proxy Server Port -
User Name name of powervoip account filled in
Password password of powervoip account filled in
does not work :(
status green online Register Failed: 500 Internal server error
when i log into powervoip by hand on the laptop it asks me to put in a verification code, read what is written in strange letters and then type it in.
*Access to our SIP server from your accounts is disabled by default.
You can enable this by changing the settings below.* I get this on powervoip, should I enable this?
WelshPaul:
yes you need to enable it.
mandm:
OOH account say registered now. :D
I think this might work after all. ;D
Thank you
When I ring I hear a voice ask me to go to obitalk.com and configure my device.
I have to ring with star star 1 before the number. but then I get a lady telling me she can not connect my call.
Should I check this box as well or will that make all my calls on the other phone go through obi as well?
Yes it rings it rings my landline rings when I call it with the obiphone. THANK YOU ALL. :)
WelshPaul:
The OBi110 sends all outgoing calls over the PSTN line by default. If you want all calls to dial out over powervoip then you need to change the primary line to SP1. (If powervoip is configured against SP1)
You can find the primary line option under Physical Interfaces > PHONE Port > PrimaryLine
That way you no longer need to dial **1 before making any calls.
Navigation
[0] Message Index
[*] Previous page