obi110 france for powervoip how to start up

[mandm]

homephone connected to orange livebox phone output.
second phone connected to the output on orange livebox internet where i would put in a laptop normally.
Is that correct?
I dialled the number with the stars and the laptop can see obi110 and gave obi# number, mac and sn number.

What is the next step?
I need it configured for powervoip.
I want to use that second phone only for powervoip international calls:
I use my normal homephone for calling in France.

I am asked Service Provider Proxy Server      
Service Provider Proxy Server Port      
Outbound Proxy Server      
Outbound Proxy Server Port      
User Name      [Your account will be used in the OBi's authusername parameter]
Password       [OBiTalk does not store this password. Your OBi Device will have its password updated if this field is modified.]
URI
where to find?

[mandm]

I tried to fill out but it stqted internal server error:
I have now reset the obiexpert config i hit that button and reset but still nothing:
I used this thread for that but do not understand any of what it states:
should I ring someone in obi to talk me through this and wht number
HEEEEEEEEEEEEEEEEEEEEEEEEEELP

CAN I GET MY MONEY BACK THIS BOX DOES NOTHING IN FRANCE AND ALL TUTORIALS ARE UK ONLY AND NO ONE TO CALL FOR HELP;

[drgeoff]

The OBi110 works perfectly well in France and many other countries all over the world.

The product is designed in the USA and all its settings default to USA ones.

If you do not know your powervoip SIP settings you can only get them from powervoip.

Have you registered your Obi using the **5 xxxxx procedure?

[mandm]

I REGISTERD 2 TIMES WITH THAT WAY AND THAT WORKS
SP1
powervoip
Register Failed: 500 Internal server error
  
SP2 (Optional)
powervoip
Register Failed: 500 Internal server error

powervoip sip port 3830 ip and a phone number given: uri ID@sip.powervoip.com
I do not know why on one page they say to connect obi to the laptop and on obi site they say to connect it to orange live box, i did that:
I SEE    Register Failed: 500 Internal server error (server=77.72.169.129:5060; retry in 20s
NO IT DOES NOT WORK IN FRANCE I HAVE USED SET UP AS PER THREAD
I WANT TO RING WITH MY HOMEPHONE THAT IS CONNECTED TO THE ORANGE PHONE INPUT. But when i ring to spain i should ring via internet powervoip and need to connect this to my second phone.
i was told to buy obi for that but it does not work,

[drgeoff]

Calm down and stop shouting or no-one here is going to help you.

Can you reach the Obi echo test number?  Dial **9 222 222 222?

[WelshPaul]

If its powervoip.com you're using see: http://www.powervoip.com/sip

   SIP port : 5060
   Registrar : sip.powervoip.com
   Proxy server : sip.powervoip.com
   Outbound proxy server : leave empty
   Account name : your PowerVoip username
   Password : your PowerVoip password

[mandm]

yes the test number works and I hear my own voice echo back.  
Generic Service Provider - grandma

Service Provider Proxy Server   sip.powervoip.com   
Service Provider Proxy Server Port   5060   
Outbound Proxy Server              -
Outbound Proxy Server Port           -
User Name                                 name of powervoip account filled in
Password                                   password of powervoip account filled in
does not work

status green online Register Failed: 500 Internal server error
when i log into powervoip by hand on the laptop it asks me to put in a verification code, read what is written in strange letters and then type it in.

*Access to our SIP server from your accounts is disabled by default.

You can enable this by changing the settings below.* I get this on  powervoip, should I enable this?

[WelshPaul]

yes you need to enable it.

[mandm]

OOH account say registered now.

I think this might work after all.  
Thank you

When I ring I hear a voice ask me to go to obitalk.com and configure my device.
I have to ring with star star 1 before the number. but then I get a lady telling me she can not connect my call.
Should I check this box as well or will that make all my calls on the other phone go through obi as well?

Yes it rings it rings my landline rings when I call it with the obiphone. THANK YOU ALL.

[WelshPaul]

The OBi110 sends all outgoing calls over the PSTN line by default. If you want all calls to dial out over powervoip then you need to change the primary line to SP1. (If powervoip is configured against SP1)

You can find the primary line option under Physical Interfaces > PHONE Port > PrimaryLine

That way you no longer need to dial **1 before making any calls.