OBi200 FW Update?
MarkObihai:
We've released firmware revision 4581 today for the OBi2xx and 3xx series adapters and firmware revision 2318 for the OBi1xxx series IP Phones.
Release notes have been updated
OBi2xx & OBi3xx Adapters:
http://www.obitalk.com/forum/index.php?topic=8982.0
OBi1xxx IP Phones:
http://www.obitalk.com/forum/index.php?topic=8983.0
If you're having problems getting the software update onto your 2xx or 3xx series adapter then follow the manual upgrade instructions contained in the release notes linked above.
SteveInWA:
Hey Mark -- great job on the new firmware and on the release notes!
Take a look at the notes for the IP phones: it looks like you've got a formatting and/or editing error, resulting in one new feature split into two bullet points, and the result is confusing. This is the raw text of the two bullets:
New "enhanced dialer" option to allow user to pick a partially matched number from a list when dialing. To use
Support returing to the "default line key tab" with the DefaultLineKeyTab user-preference parameter, default of which is "1". If all calls are idle on all pages, phone will return to the default line key tab when auto-returning-home-page is triggered.
zorlac:
FWIW, on an obi200 if you've changed the X_DefaultRing setting on a SP slot using RingTo it will default back to 1.
The RingVoltage & OnHookTipRingVoltage settings I had changed were not reset back to the default values.
MarkObihai:
Quote from: SteveInWA on February 06, 2015, 05:21:28 pm
Hey Mark -- great job on the new firmware and on the release notes!
Take a look at the notes for the IP phones: it looks like you've got a formatting and/or editing error, resulting in one new feature split into two bullet points, and the result is confusing. This is the raw text of the two bullets:
New "enhanced dialer" option to allow user to pick a partially matched number from a list when dialing. To use
Support returing to the "default line key tab" with the DefaultLineKeyTab user-preference parameter, default of which is "1". If all calls are idle on all pages, phone will return to the default line key tab when auto-returning-home-page is triggered.
Thanks for spotting this - I've fixed the editing error.
Taoman:
Didn't notice anything in the release notes but I'm seeing an MOS score now in the Call Status statistics. Has that always been there?
Navigation
[0] Message Index
[#] Next page
[*] Previous page