OBi200 FW Update?
corporate_gadfly:
Quote from: Mister_M on February 05, 2015, 11:28:23 am
Noticed when I logged in there was a FW update available for my OBi200. Last FW update release notes I see is from November 25, 2014. Anybody have any ideas what the latest release will do?
OBi202. Just updated to firmware 4581.
Here's the diff between 4471 and 4581 for the backup generated by the OBi.
Things that jump out are:
Code:
StartConfOnPeerRing
UseForFaxOnly
EndConfWhenHangUp
X_AcceptSipFromRegistrarOnly
X_UserAgentPorts
X_VqPublishEnable
X_VqPublishUrl
X_VqPublishInterval
X_UserAgentContactFollowProxyServerTransport
ProfTech:
The trouble with using the portal to configure / maintain an Obi is that the portal may not be regularly updated to add new settings. I'm pretty sure that there are already several settings in an Obi 200 that can only be accessed from the internal web page(s). If I "upgrade" to a new rev while using the portal, who knows what those various settings default to? :'(
SteveInWA:
Quote from: ProfTech on February 05, 2015, 05:37:37 pm
The trouble with using the portal to configure / maintain an Obi is that the portal may not be regularly updated to add new settings. I'm pretty sure that there are already several settings in an Obi 200 that can only be accessed from the internal web page(s). If I "upgrade" to a new rev while using the portal, who knows what those various settings default to? :'(
Evidence, please. Screenshots...
BigJim_McD:
I upgraded our OBi202 and OBi200 to: SoftwareVersion 3.0.1 (Build: 4581).
I made several test calls, both incoming and outgoing without any issues.
I have the following services configured
One DID on Vestalink that is used as our main home service for Incoming calls.
One Google Voice phone # used as the main home service for Outgoing calls.
One Google Voice phone # used as the main V-OFC service for Outgoing calls.
One voip.ms DID # used as the main V-OFC service for Incoming calls.
One voip.ms DID # that Call Forwards all calls {Home & V-OFC} to "NoMoRobo" for call screening.
--Also--
Four voip.ms Extensions used mainly for my personal VoIP Lab. There is one extension used on each of four OBi's, {OBi202, OBi200, OBi110 and OBi100}.
At least so far, I have not found any changes to any of several "Custom" settings made using OBiTalk Expert Mode since updating the Firmware.
WelshPaul:
OBi202 running 4477 here... No software update available when using ***6.
Navigation
[0] Message Index
[#] Next page
[*] Previous page