Getting MWI to illuminate on SPA942 connected to OBI202

<< < (2/2)

Tango:
Quote from: wildbilll on February 10, 2015, 02:23:55 pm

The following document spells out how to use an IP phone as an extension to the OBi device.
http://www.obihai.com/docs/OBi-VoIP-Device-Attach-Legacy-IP-Phone-Workbook-v1-0.pdf
All work I performed was in accordance with the flat network example.
The SP4 service is connected to the ip phone and SP4 routes the calls from the SP1 service to the SP4 service.


I re-read the provided link for the document, and still wonder why you need to use an OBi202 at all? I.e. do you need to bridge your IP phone to an OBi Voice Service, as opposed to a direct plugin to your router Ethernet port?

FWIW, this Linksys SPA942 setup suggests a Message Waiting button in the Call Feature to check/uncheck on the 2nd page:
https://www.inphonex.com/support/linksys-spa942-configuration.php

Can it be that simple missing "link"?

I hope there are no "stupid" questions :)!

Navigation

[0] Message Index

[*] Previous page