Blocking a specific number inbound on PSTN

<< < (2/2)

WelshPaul:
An even better one: 166@sip.voipfone.net

JeremyW:
Quote from: WelshPaul on February 12, 2015, 05:43:03 am

An even better one: 166@sip.voipfone.net


 :D Absolutely perfect. Love it. :D Thanks for cheering up my Thursday!

JeremyW:
Hmmm... I just tested this by adding my own mobile number to the InboundCallRoute and it doesn't work. Home phone rings anyway and no diversion to the recorded message.

azrobert:
Check the OBi110's call history to see exactly how the callerid is formatted.
The callerid is to the right of Peer Number.

To access Call History:
Log directly into the OBi using the local interface.
Key the IP address of the OBi into a Web Browser.
Hit Enter
The UserID and default Password are both "admin".
Click Status on the left column.
Then click Call History.

JeremyW:
Quote from: azrobert on February 12, 2015, 06:39:35 am

Check the OBi110's call history to see exactly how the callerid is formatted.
The callerid is to the right of Peer Number.

To access Call History:
Log directly into the OBi using the local interface.
Key the IP address of the OBi into a Web Browser.
Hit Enter
The UserID and default Password are both "admin".
Click Status on the left column.
Then click Call History.



Perfect - thanks. I just needed a '-' between the area code and the number. Working now :)

Navigation

[0] Message Index

[*] Previous page