Anveo softphone call to AutoAttendant

<< < (2/2)

Iconexotic:
Hi everyone.

Big special thanks to AZRobert!!! 

I realized the problems thanks to syslog: http://www.obitalk.com/forum/index.php?topic=707.0

There were three stages in my implementation, all of them with problems.  Now all is working all right. 

**FIRST** - Softphone configuration
Account registration domain HAS TO BE  = sip.anveo.com:5010 in the softphone selected.  But Anveo's web site shows erroneous configuration.
http://www.anveo.com/faq.asp?code=sip_xlite  is wrong
http://www.anveo.com/faq.asp?code=sip_zoiper is wrong

**SECOND** - Calling to an Anveo SIP account
To call between Anveo SIP accounts, I did not use SIP URI, you gotta simply dial 1555xxxxxxxxxx
where xxxxxxxxxx is Anveo account number callee.

**THIRD** - Identifying the caller
The caller is a softphone, the callee is an OBI110

For Counterpath X-Lite: Menu > Softphone > Account settings > Account > Display name := xxxxxxxxxx
where xxxxxxxxxx is your 10-digit Anveo account number.  This is the number that will be configured in SP1 > X_InboundCallRoute

For Zoiper 3.6 for Windows: Menu > Preferences > Accounts > General > Caller ID name := xxxxxxxxxx
where xxxxxxxxxx is your 10-digit Anveo account number.  This is the number that will be configured in SP1 > X_InboundCallRoute

End of story 

:)

Navigation

[0] Message Index

[*] Previous page