Master/Slave setup

<< < (3/3)

azrobert:
I believe this is a GoogleVoice setup problem and not a routing issue.
Here is a complete list for GV setup:
http://www.obitalk.com/forum/index.php?topic=8560.msg56460#msg56460

ctzw:
Quote from: azrobert on February 15, 2015, 04:08:55 pm

Do not setup a speed dial.

Physical Interfaces > Phone Port > DigitMap:
(***S0|**0S0|0S4|x[1-9]xxxxxxxxxS0|**[1-8]x[1-9]xxxxxxxxxS0|**9(Mpp)|@@.)

Physical Interfaces > Phone Port > OutboundCallRoute
{***:aa2},{(<**9:>(Mpp)):pp},{(<200123456*>(@@.)):pp}
{(<200123456*>(@@.)):pp}


Thank you, azrobert. I was able to find the correct place in my OBI200 for these setup. However, when I clicked 'Submit' for the changes, and rebooted the device as suggested, the changes went away: all default values were shown... I tried many times, no help (see the enclosed pics). Plus, the speed dial I set up went away as well. Do you know why? Thanks again.

azrobert:
If you use the local interface to configure your OBi you must disable OBiTalk auto provisioning, otherwise OBiTalk will overlay any changes you make.

System Management -> Auto Provisioning
Under OBiTalk Provisioning
Method: Disabled

Navigation

[0] Message Index

[*] Previous page