Master/Slave setup
BigJim_McD:
Quote from: Shiguang on February 23, 2015, 10:10:47 am
I setup a Master Obi in the US and a Slave Obi in China as you described, and tried to made a call to the Master Obi which is designed to be forwarded to the Slave Obi. However, after 5 rings, the call was forwarded to Google Voice voice box. How can I disable this function?
Shiguang,
Google Voice - Voice mail picks up after ringing for 25 seconds. I have to answer incoming calls before the 5th. ring to prevent calls being picked up by the Google Voice - Voice Mail on my Google Voice numbers.
I haven't found anyway to change or increase the ringing time on Google Voice before the Voice Mail systems answers the call.
azrobert:
If you want to call the slave in China from the Master in the US, setup a speed dial on the Master like this:
pp(200654321)
or
**9200654321
Change 200654321 to the OBi number of the Slave.
Just dial the speed dial number from the phone connected to the Master.
You probably already have a speed dial setup like the above.
Shiguang:
I want to use any land or cell phones in the US to call the Slave Obi in China through the Master Obi in the US.
azrobert:
Quote
I called from the US to the Master device (SP1 GV) in the US, and wanted to be received by the Slave device (without GV) in China, but failed. I heart the GV voicemail prompt.
When you call the GV number does the phone attached to the local OBi ring or are you always sent to voicemail? If you go to voicemail, I suggest opening another topic and maybe someone else can help you.
Quote
I want to use any land or cell phones in the US to call the Slave Obi in China through the Master Obi in the US.
There is 2 ways to accomplish this. You can be routed unconditionally based on callerid or you can be directed to the Auto Attendant. From the AA you can ring the local OBi phone or be directed to China.
Assuming GV is on SP1.
Unconditional
Voice Services -> SP1 Service -> X_InboundCallRoute:
{(12223334444|12223335555|12223336666):pp(200654321)},{ph}
12223334444, 12223335555 and 12223336666 are the callerids you want sent to China.
Change 200654321 to the OBi number of the Slave.
Conditional
Voice Services -> SP1 Service -> X_InboundCallRoute:
{(12223334444|12223335555|12223336666):aa},{ph}
After the AA prompt, enter "2" then the speed dial number setup in Reply#6 above. The caller will be routed to China.
After the AA prompt, enter "1" to ring the local OBi phone.
Shiguang:
Quote
When you call the GV number does the phone attached to the local OBi ring or are you always sent to voicemail? If you go to voicemail, I suggest opening another topic and maybe someone else can help you.
Yes, when I call the GV number of the master Obi in the US, after 5 rings, the calls are always sent to voicemail, not to the Slave Obi in China.
Navigation
[0] Message Index
[#] Next page
[*] Previous page