Register Failed: No response from server
timnsid15:
Thanks Mango!
I'm reading up on Double NAT right now.
Thanks for pointing me in some direction. I really, really appreciate it.
timnsid15:
Quote from: Mango on February 26, 2015, 12:25:45 am
- Double NAT could be causing your problem. If possible, place your modem in bridge mode so that you are only using one router.
It seems as though Double NAT was the problem. I put my modem into bridge mode and entered my isp login details into router and it has been fine since. Every other device in my network had been working properly so I definitely thought the solution was an Obi setting tweak but obviously it was not. Thanks again for pointing me in the right direction!
Mango:
That is great to hear! Thanks for the update.
If the problem ever comes back, let us know and we can troubleshoot further. Hopefully what you did permanently solves it.
sambell:
Using stun server also fixed the same problem I had; enter obi expert configuration, service providers, ITSP profile A/B general and enable stun . I used stun.xten.com as a stun server.
Mango:
STUN should not be used as it adds an additional point of failure. If you want to use it anyway, that is fine, just remember to check it if you ever have new problems.
Navigation
[0] Message Index
[*] Previous page