iphone does not ring.
Dranon2:
Quote from: azrobert on March 05, 2015, 12:20:10 pm
Did you verify on the System Status page that you are registered with port 5060? YES
It has been my experience helping others that you can use any character string before the "@", but others with a CISCO phone have had problems too.
Did you assign a name or was a name automatically assigned to the OBi account on the IP Phone? A wild guess is to use that account name in front of the "@".
You can setup a speed dial to test like this:
spx(account_name@xx.xx.xx.xx:5060)
Also check the OBi Call History to make sure the call is routed correctly.
To access Call History:
Log directly into the OBi using the local interface.
Key the IP address of the OBi into a Web Browser.
Hit Enter
The UserID and default Password are both "admin".
Click Status on the left column.
Then click Call History.
This is what I have on the call history
10:52:06 From GT1(15629064477) Fork to:
PH1
SP4(1001)
SP4(xxxxxxxxxx@192.168.0.10:5060,ul=15629064477)
10:52:06 Ringing (PH1)
10:52:06 Call Failed (404 Not Found; SP4(xxxxxxxxxx@192.168.0.10:5060,ul=15629064477))
10:52:06 Call Failed (486 Busy Here; SP4(1001))
azrobert:
You have the syntax incorrect.
You have: SP4(xxxxxxxxxx@192.168.0.10:5060,ul=$1)
Should be: SP4(xxxxxxxxxx@192.168.0.10:5060;ui=$1)
My 1st example had a typo and I had a comma instead of a semi-colon.
I had the "ui" correct.
Anyway, this is irrelevant because the invalid option will just be ignored and the call should still work. You just won't get CallerID.
I don't know why this isn't working.
Does anyone know why SIP URI calls won't work on a CISCO IP phone?
There is another way to do this if your IP phone can have 2 active accounts.
Get a free account at Callcentric.
SIP2SIP and GETONSIP are other options.
Register the 2nd account on the IP phone to your Callcentric account.
Route the call to: SP4(17771234567@in.callcentric.com;ui=$1)
Change 17771234567 to your Callcentric account number.
Dranon2:
I have a callcentric account but I have No idea how to register it to my cisco ip phone. I know how to register it to the obi!
azrobert:
I assume you are using your Callcentric account with your OBi, so you will have to create a 2nd extension.
Log into your Callcentric account.
Click on Extensions.
Click Add New Extension
Select Extension 101
Enter a password
Select CallerID to Send
Save
In your IP Phone
Proxy: callcentric.com
UserName: 17771234567101
Password: your password
I never owned a CISCO phone, so this is the best I can do.
In the OBi route the call to:
SP4(17771234567101@in.callcentric.com;ui=$1)
Dranon2:
Ok little more help WHERE in the obi do I route the call to? x_inboundcallroute?
your examplen the OBi route the call to:
SP4(17771234567101@in.callcentric.com;ui=$1)
Navigation
[0] Message Index
[#] Next page
[*] Previous page