no incoming calls on Obi device

(1/3) > >>

nmstough:
I have two Obi devices set up to work with Google Voice (at two different locations).  Everything works fine on my Obi200 device for both incoming and outgoing calls.  But I am not getting incoming calls on my Obi110 device.  Only outgoing works.  Both devices are showing up with the green circle and indicate "connected" on the Obitalk portal. Any ideas whats wrong? 

N7AS:
Are both OBi devices configured with the same GV number? If so, in order to be able to receive calls on both, both OBis have to be 2xx series (OBi200 or OBi202). It will not work if one is an OBi100 or OBi110.

nmstough:
Yes, its the same number.   What do I have to do to get it to work on the Obi 110 device?  Remove the Obi 200 from my account?  And then add it back and remove it and add it every time I go from place to place?  That would be a real pain.

Ryan_Tilton:
Is forward calls to gchat enabled in your Google Voice configuration?

azrobert:
Send the inbound GV call on the OBi200 to the Phone Port and the OBi110.

OBi200
Assuming GV is defined on SP1.

Voice Services -> SP1 Service -> X_InboundCallRoute:
ph,pp(200123456)

Change 200123456 to the OBi Number of the OBi110.
The call will be sent to the OBi110 over the OBiTalk network.

Navigation

[0] Message Index

[#] Next page