HELP. Obi202 Retrying Register (server=69.160.x.x:5060) status

(1/3) > >>

GG50:
First time Obi user.  Love the device. Successfully configured freephoneline, GV, and SmartCall Voip service providers. However, I have problems setting up a different voip service called oriunde.
This voip has been flawlessly working (behind one or even two routers, no ports forwarded) for 10 years now on a Sipura SPA-1001 (configured by provider).
I tried it on a PAP2T and it worked (with Sip server, ID and Password info only), same router and even both ATAs in parallel (Sipura and PAP2T).
Long story short, I cannot make it to work on OBI202.
I get status Retrying Register (server=69.160.240.160:5060) or sometime: Paused. However, I can place a call but I cannot receive (no ring or busy at the other end).
I tried without success:
-   Disabled all service providers except this one.
-   Factory reset Obi and set up only this account.
-   Bypassed my router (connected Obi202 direct to internet modem)
-   Changed SIP port
I have (from the voip provider) Primary and secondary DNS  (PAP2T worked without), stun server (Sipura spa-1001 works without) and domain info, but I don’t know how to set them up in Obi202. (I used ObiTalk portal).
Help please

GG50:
What might be the reason(s) for a voip SP to work on older devices (Sipura SPA-1001 and PAP2T) with minimum configuration, and not working on OBI202?

azrobert:
I did a host name lookup on 69.160.240.160 and got "mail1.numarderomania.net".
Is this correct?

http://www.whatismyip.com/ip-address-host-name-lookup/

GG50:
Quote from: azrobert on March 06, 2015, 07:21:24 am

I did a host name lookup on 69.160.240.160 and got "mail1.numarderomania.net".
Is this correct?

http://www.whatismyip.com/ip-address-host-name-lookup/



Yes (sip and stun)

azrobert:
Do they use SRV?
If yes, you must enable SRV on the OBi

Service Providers -> ITSP Profile X SIP -> X_DnsSrvAutoPrefix: Checked

Navigation

[0] Message Index

[#] Next page