Rotary or pulse dialing and the dialgizmo. Obihai wish list and notes.

<< < (2/2)

simpleLink:
Thanks you, M105!

I got my AE80 working with an Obi110 using the DialGizmo following your notes.

Note 1a:
I have my OBI's PhonePort trunked to a backend SIP server
(Physical Interfaces -> PHONE Port -> PrimaryLine = SP1 Service)
To get the 4 seconds interdigit wait, you need to modify the DigitMap
under the Service Provider Profile instead:

Service Providers
    ITSP Profile A
        General
            DigitMap
before
(911S0|1xxxxxxxxxxS0|011xx.S2|xx.S2|xS2|xxS2|*X.S2|(Mipd)|[^*#]@@.)
after
(911S4|1xxxxxxxxxxS4|011xx.S4|xx.S4|xS4|xxS4|*X.S4|(Mipd)S4|[^*#]@@.S4)

(in this case, you can leave the DigitMap under PHONE Port with the default setting)

Dialing rotary is fun but takes some practice to become proficient. In the meantime,
Obi's User Settings -> Speed Dials  is much easier to program than using the Dial-Hold.


 

Navigation

[0] Message Index

[*] Previous page