Advice if you use the Speakerphone feature on your Phone:

(1/1)

Crow550:
While the Obihai boxes do a good job with the default gain settings for Handset mode. When using Speaker Phone you may need to adjust the TX & RX gain in the expert Obi settings.

You can usually tell if the people on the other end report lots of background noise from the TV being on normal volume level as example then adjust the RX Gain to a lower level.

Also if they report your voice cutting out due to background noise including that from the Phone's speaker then set the TX Gain lower.

This all depends on the make and model of the phone of course.

These are in the Obi's Expert settings under Physical Interfaces. Select Phone.

* I had to help someone with a Obi100 and Panasonic Phone set.

Hope this helps anyone else with a similar situation. ;)

Navigation

[0] Message Index