OBI-FREEPBX and CID

<< < (2/2)

azrobert:
Have you change the OBi Line RingDelay setting?

rjstott:
Might have, last time I messed about was before xMas, 'cos her indoors complained about time to connect calls and answer? Line Delay is currently 400?

azrobert:
I don't know how callerid works in France, but in N. America the PSTN callerid is transmitted between the 1st and 2nd ring. The RingDelay is needed to give the OBi time to receive the callerid before processing the call. If RingDelay is set too low, the OBi will not see the callerid.

Also, do you have the correct CallerIDDetectMethod for France? I can't help with this.

azrobert:
Go back to X_SpoofCallerID checked and remove ui=$1
You won't get CNAM with the ui=$1 method.

rjstott:
Hi,

SUCCESS. I managed to find a bundle of parameters for France and updated some such as CPC Polarity reversal and disconnect tone. CID Method was already ok as FSK V23. I have set Ring Delay to 3 secs, reset X_Spoof back to ON and removed the $1. Anyway its working. My guess is that it was me reducing the Ring Delay that caused the problem.

Now I can go back and try to re-instate challenges against unknown incoming calls!

Many THX

Navigation

[0] Message Index

[*] Previous page