X_SkipCallScreening still not working
azrobert:
X_SkipCallScreening is not working with Build 2289.
I get the call screening prompt with incoming calls and GV does not recognize when I press "1" to accept the call.
These incoming calls have CID and are not anonymous.
jimates:
I am having no problem with it. It worked before the upgrade and still works after.
RonR:
I just tested with CallerID and anonymous, and X_SkipCallScreening appears to be working properly here on 2289.
azrobert:
I determined what's causing the problem. Build 2283 introduced a DTMF problem and the fix was to change DTMFMethod from "Auto" to "Inband". Changing DTMFMethod to "Inband", not the new firmware caused my call screening problem. Build 2289 X_SkipCallScreening works perfectly with DTMFMethod=Auto.
My option is to be able to receive inbound calls or have DTMF work, but not both.
RonR:
Quote from: azrobert on June 01, 2011, 10:15:57 pm
My option is to be able to receive inbound calls or have DTMF work, but not both.
While I don't have X_SkipCallScreening problems, I just found that the DiscoverCard [(800) 347-2683] DTMF problems that arose in 2283 that were fixed in 2286 are back in 2289. I downgraded to 2286 and it works perfectly. Back to 2289 and it's broken again.
Navigation
[0] Message Index
[#] Next page