How Do I Check Call History? Obi 202 with GV

(1/3) > >>

kgjulie:
Hi -- I am trying to check the history of a call I placed this morning using my Obi 202 with GV configured as SP3. 

I dialed into a conference call and must have entered the wrong passcode sequence as it put me into a different call than everyone else attending. It became an issue since I was supposed to lead the call.

I checked GV History, but that only records the phone number dialed, and not the sequence of digits punched after the call was answered.

Does OBI record that info and, if so, how do I access it?  I tried searching and found several references to checking the Obi's History but no instructions for how to access it.

Thank you!

lrosenman:
You need to login to the obi's local web interface (***1, get the IP address) http://<ipaddress>

userid: admin
password: (default is admin, but might be changed, see the portal).

Then under status on the left menu is call history.

it holds the last 400 calls on the 202.

drgeoff:
I doubt that Call History will show those "DTMF digits" which are dialled after a call is established.

kgjulie:
Quote from: lrosenman on March 26, 2015, 11:12:01 am

You need to login to the obi's local web interface (***1, get the IP address) http://<ipaddress>

userid: admin
password: (default is admin, but might be changed, see the portal).

Then under status on the left menu is call history.

it holds the last 400 calls on the 202.




Thank you!  I tried following these instructions (I assumed I just type the IP address into a browser window), but I got a 404 Not Found error. 

Do I need to do something to make the Obi public or discoverable on my network?

lrosenman:
I didn't have to do anything -- are you using the OBI202 in it's Router Mode?

I'm not, I'm just using it's WAN side on my switch which goes to anothe rRouter.

What browser as well?

You might want to type:

http://ip.add.re.ss

I.E. for mine:
http://192.168.200.85/

Navigation

[0] Message Index

[#] Next page