Outbound call route (Dial Plan)
RonR:
Riyas,
Strange is right! Please post the complete PHONE Port DigitMap and OutboundCallRoute with the changes installed that doesn't work. Maybe I can spot something that way.
JohnB:
Ron, I wanted something similar (all 7-digit numbers plus calls to area code 772 and 864) to go through SP1. I did this by modifying the OutboundCallRoute on the Phone Port. It seems to work fine. Is there a reason that I should change to your method?
RonR:
Quote from: JohnB on October 24, 2011, 02:46:42 pm
Ron, I wanted something similar (all 7-digit numbers plus calls to area code 772 and 864) to go through SP1. I did this by modifying the OutboundCallRoute on the Phone Port. It seems to work fine. Is there a reason that I should change to your method?
I generally don't do that sort of thing in the OutboundCallRoute, but if it works the way want it to, that's what's important.
Riyas:
Quote from: RonR on October 24, 2011, 02:22:37 pm
Riyas,
Strange is right! Please post the complete PHONE Port DigitMap and OutboundCallRoute with the changes installed that doesn't work. Maybe I can spot something that way.
Hi RonR,
These are the settings :
Phone > Digitmap : [1-9]x?*@@.|[1-9]|[1-9][0-9]|911|**0|***|#|**1(Msp1)|**2(Msp2)|**3(Mvg3)|**4(Mvg4)|**8(Mli)|**9(Mpp)|(Mpli))
Phone > Outbound callroute : {([1-9]x?*@@.):pp},{(<#:>|911):li},{**0:aa},{***:aa2},{(<**1:>(Msp1)):sp1},{(<**2:>(Msp2)):sp2},{(<**3:>(Mvg3)):vg3},{(<**4:>(Mvg4)):vg4},{(<**8:>(Mli)):li},{(<**9:>(Mpp)):pp},{(Mpli):pli}
Thanks for your help
RonR:
Quote from: Riyas on October 25, 2011, 10:46:42 am
Phone > Digitmap : [1-9]x?*@@.|[1-9]|[1-9][0-9]|911|**0|***|#|**1(Msp1)|**2(Msp2)|**3(Mvg3)|**4(Mvg4)|**8(Mli)|**9(Mpp)|(Mpli))
Riyas,
I assume you have a '(' at the beginning of this line in the OBi and it's simply an omission in your posting?
And your PrimaryLine is still PSTN LINE?
Other than that, I don't see an explanation.
You might try the following steps:
1. System Management -> Device Update -> Backup Configuration (Use OBi Version : checked)
2. System Management -> Device Update -> Reset Configuration
3. System Management -> Device Update -> Restore Configuration
4. Re-enter all passwords (they're not saved in a backup file).
I believe you had an unexplained problem in the past that required resetting the unit back to factory defaults and reconfiguring it in order to clear up the mystery (I've had this happen to me on more than one occasion).
Navigation
[0] Message Index
[#] Next page
[*] Previous page