How to modify the phone port parameters?

(1/1)

jc2516:
I purchased an OBI200 a few days ago, and I set up a GV on SP1 at obitalk.com. Now I want to change the digmap for Physical Interfaces. I change the Digmap, submit and reboot. After rebooting, the digmap is still the original. What should do to change it?

Thanks.

azrobert:
If you use the local interface to configure your OBi you must disable OBiTalk auto provisioning, otherwise OBiTalk will overlay any changes you make.

System Management -> Auto Provisioning
Under OBiTalk Provisioning
Method: Disabled

lrosenman:
The other option is to use ObiExpert from the portal to change parameters.

Then you still get ObiTalk advantages. 

If you want to.

jc2516:
Thank you both. I will try.

Navigation

[0] Message Index