Please help for digmap.

<< < (2/2)

azrobert:
I tried dialing *7210 and I think the OBi will forward calls to number 10 at your primary line. I have a very unorthodox config and got an unusual result. It's forwarding numbers to TG1(10)

Look at the following to see what it did for you:
Voice Services -> SP1 Service -> CallForwardUnconditionalNumber

What does this have to do with routing outbound calls to SP4?
What numbers do you want to route to SP4?

You can use a Voice Gateway.
This will reuse another one of you other trunks, leaving SP4 open for another provider.
There are 2 requirements for a VG.
Outbound only.
Your provider will accept outbound calls without registration.

jc2516:
I wanted to use the SP4 to support Auto Attendant. Now I'm going to use the VG1 to do it. What should I set up the VG1 and the Auto Attendant if I want:

When the trusted number calls SP1 - SP3, the AA responses, and the outbound do:

Default: VG1. It's for 10 and 11 digits of 416, 647, 905, 289 and toll frees.

other 10 and 11 digits will go SP2.

011xx. go SP3.

I will use myID@pbxes.com as the VG1.

azrobert:
I believe PBXes requires registration, so you will have to use SP4. After we get this working you can unregister SP4 to see if it still works. It will be very easy to switch to VG1 if I'm wrong.

Why do you want to use PBXes? It will just add latency. You can define the provider directly on the OBi200. There are several free tollfree providers that you can define on a VG, like tf.callwithus.com.

Anyway, this is what you asked for. Feel free to change your mind.

Voice Services -> Auto Attendant
DigitMap: (<00:$1>|0|1[2-9]xxxxxxxxx|<1>[2-9]xxxxxxxxx)

OutboundCallRoute:
{{0:ph},{(1(800|888|877|866|855|844|216|647|905|289)xxxxxxx):sp4},{(1[2-9]xxxxxxxxx|<1>[2-9]xxxxxxxxx):sp2}

0 is when the caller selects option 1 to ring the OBi phone.
00 is for a callback.
The caller will let it ring once and hangup. The AA will call him back using the same outbound route rules.

Edit:
I had a typo in the outbound route. An extra paren. See the time of the update for when I corrected it.

azrobert:
If you are going to use the AA callback feature, there is another change you need to make.

Navigation

[0] Message Index

[*] Previous page