OBi110 reboots during phone calls after firmware upgrade
azrobert:
I tested a 12v PSU from an old router with my OBi and it worked. I did not test long term.
-DC-:
I found an old 12VDC 5A power brick that I've plugged in. We'll see if that fixes the problem. Also noticed that the OEM brick is only rated 600mA yet the OBi110 spec states "1A (max)". That's not good!
-DC-:
So much for that idea. It rebooted itself again. Guess I now have a defective unit.
RFC3261:
Quote from: -DC- on April 16, 2015, 08:52:28 pm
So much for that idea. It rebooted itself again. Guess I now have a defective unit.
Sorry it did not help, but, I would claim it was worth a shot, to eliminate one possibility (and I have recycled piles of consumer power bricks/warts/adapters that have failed over the years). The next thing I would do is try to re-flash the same firmware. While that is unlikely to fix it either, I have seen the rare case where it does due to flash memory issues. If it still reboots, I would claim you have done your diligence, and it is time to upgrade.
-DC-:
Can't re-flash the same firmware: "Previous version identical to the update. Firmware not modified."
Navigation
[0] Message Index
[#] Next page
[*] Previous page