Google Voice - How to remove 11 prefix on caller ID of incoming calls
wwwin:
Hello newbie here got my Obi202 few days ago. Using Google Voice on Sp1 and another GV number on Sp2.
Incoming caller id numbers show up with a 11 prefix before the area code. I will like to remove this 11 so that I call out from call history rather than having to dial the number. Will this work?
Label the digimap. remove11
To remove the 11 when dialing out
{(<11:>xxx xxxx):sp1}, {(<11:>xxx xxxx):sp2}I(Mremove11)|[^*#]@@.)
or to remove the 11 from showing up in the caller id of the incoming call
{(<11:>xx.):ph} , {(<11:>xx.):ph2} I(Mremove11)|[^*#]@@.)
I read the help file on digimaps and I am wondering if one or the other of the above will work
Also want to know if thw Obi would reboot automatically if I make changes or do I manually reboot Also is it possible to brick the unit if a digimap with incorrect syntax is added. Any help would be greatly appreciated
N7AS:
If you want to remove the leading 1 from 11 digit numbers go to:
Voice Service > SPx Service >
InboundCallRoute {(<1:>xxxxxxxxxx):ph},{ph}
drgeoff:
Quote from: wwwin on April 08, 2015, 11:39:25 pm
Also want to know if thw Obi would reboot automatically if I make changes or do I manually reboot Also is it possible to brick the unit if a digimap with incorrect syntax is added.
If you configure via the Obitalk portal the ATA will reboot automatically. If you do it via the local web GUI you need to click the 'Reboot' button.
No you cannot brick a unit with incorrect digit map syntax. Even if you lost access to the device configuration the reset button on the underneath would bring it back.
Add a extra '1' to the reply above to remove leading '11'.
wwwin:
Thank you so much drgeoff and N7AS. Will do .
wwwin:
Hey guys, I added exactly as indicated and the 11 still shows up. If I put all the code already into the Voice Service do I still need to add something to the User Settings/User Defined Digimaps?
Navigation
[0] Message Index
[#] Next page